Product Description

Auto Draw Function: 5 quick puffs to power the vape on, 2 quick puffs to activate the pre-heat mode, and 3 quick puffs to change the voltage settings. The Preheating will last 15 seconds with 2.0V pre-heat voltage. In the preheating mode, the four lights will blink slowly, press the power button 1 time or pull on the mouthpiece 1 time to stop preheating.

Power Button Function: Quickly press the power button 5 times to power ON/OFF the DAZZii Boxx. Quickly press the power button 3 times to change the voltage to your favorite temp setting. Quickly press the power button 2 times to activate pre-heat mode.

Battery and Charging: Red light will flash 5 times when the battery power is less than 30%.

Charging: Red light on

Full Charging: Green light on

Low Battery: Red light will flash 8 times, and the device will fully turn off.

Battery Life/Cartridge Protection: After 10 continuous seconds of use, the red light will flash 4 times, and the automatic vape time cut off will activate, turning off the heat (but not the power), press the button, or pull-draw to restart.

How To Use: Please fully charge the battery before first use, the light will turn green once charged, disconnect the device from the power source. Make sure that the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not activate if the bottom connector is not attached. You will see the red light flash when the battery is connected. Remove the bottom magnetic connector and screw in the cartridge. Insert the cartridge & the bottom of the device into the top cover of the device. The green light will flash two times when connected properly. If the device is powered off, press the power button 5 times to turn it on. Press the bottom button 3 times or auto inhale 3 times to change voltage. Auto Inhale on the mouthpiece two times to activate pre-heat, or you can also press the bottom button two times to activate preheat. The preheat time will last 15 seconds at 2.0V, then will switch to your previously selected voltage. Simply pull from the mouthpiece or push the button to activate the cartridge.